Some useful tips on how to maintain the hydraulic system of the Cat 563 vibratory roller equipment

If you are working with any type of heavy construction equipment, the one thing that every machine has in common is a powerful hydraulic system. From a good maintenance perspective, construction machine’s hydraulic system is often one of the most ignored components. Most of the operator does a daily inspection process just to check the machine, but if you want to protect your heavy investment and keep your equipment, especially the Cat CP 563E roller safe and secure, then you need to care its hydraulic system a lot. In this article, we will focus on three major elements of any hydraulic system of the Cat CP 563E roller, which are oil, filtration and system integrity.

Oil: –

The major aim of every contractor is to lower the overall operating cost. Some construction contractors will take this concept into the wrong way and use the low-quality and cheapest hydraulic oil in order to keep the operational costs down. This strategy can definitely save a few bucks in the short term, but can cause severe harm to your Cat CP 563E roller’s hydraulic system over time. Being an owner, will you see an used heavy equipment failure right away? Of course not, but using the high-quality and premium hydraulic oil can be the difference between an axial piston pump system (a very expensive part) lasting 10,000 hours instead of 5,000 hours.

Filtration: –

One mistake, which is mostly done by the operators in the maintenance process of the Cat CP 563E roller field is neglect of the hydraulic oil filter. The filter attachment is usually incorporated into the tank, so it is very hard to see that’s why most of the people overlook to check the filter attachment. You should know the fact that an old filter is obviously not going to perform better as well as a new one, so it is significant to follow the manufacturer-recommended intervals for the proper filter replacement. When you are replacing the filter system of the Cat CP 563E roller, it is also vital to use the high-quality filter attachment recommended by the manufacturer. The low-quality filter will allow contaminates into the internal system of the Cat CP 563E roller that will wear away at seals, valves, and spools. If you use a cheap filter attachment in a sophisticated hydraulic system, then it will bring a million-dollar piece of roller equipment to its knees. So, avoid this mistake to save your machine’s hydraulic system.

System Integrity: –

We’ve talked about the two basic topics in the above two paragraphs, now it’s time to discuss the system integrity of the Cat CP 563E roller. You have to check your equipment to avoid any leaks because one thing you should keep in mind is that every time you have a tiny or small leak, the dirt and other harmful things will inevitably find its way in. After that, it will ruin your machine’s performance. Another factor that is often overlooked is fluid checking, so it’s important to check the operator’s guidebook and follow the recommended fluid sampling intervals.

The hydraulic system is one of the most important components of the Cat CP 563E roller, so make sure that it’s not being overlooked. Follow the above tips, which help to extend the life of a vibratory roller machine, prevent costly failures and ultimately protect your heavy investment and lower the overall operational cost.